Dupont Jumper Wire 2Pin 30cm

SKU: TP3001
Dupont jumper wire 2-pin 30cm AWG26 with red and black wires, shown in male-male, female-female and male-female versions
Dupont jumper wire 2-pin 30cm AWG26, female to female, red and black wires with 2-position connectors at both ends
Dupont jumper wire 2-pin 30cm AWG26, female to male, with a male pin connector on one end and a female socket on the other
Dupont jumper wire 2-pin 30cm AWG26, male to male, red and black wires with male pin connectors at both ends

Dupont Jumper Wire 2Pin 30cm

SKU: TP3001
Type
Regular price $1.19
/
  • Free shipping on all orders over $100
  • Secure payments
  • In stock, ready to ship
  • Inventory on the way

Add $100.00 more for free shipping

Tax included. Shipping calculated at checkout.

You'll also need

A 30 cm, 2-pin Dupont jumper wire with 2.54 mm connectors, available as Female to Female, Female to Male or Male to Male.

This is a two-wire AWG26 cable with a 2-position Dupont connector at each end. It joins two adjacent pins on 2.54 mm headers and breadboards in one plug-in connection.

Connector
2-pin Dupont
Pitch
2.54 mm
Length
30 cm
Wire
AWG26

Specifications

Wire
Wire gauge AWG26 (nominal conductor diameter 0.405 mm, 0.129 mm²)
Wire colours Red and black
Length 30 cm
Connector
Pitch 2.54 mm (0.1 in)
Pins per connector 2
Connector style Dupont housing, 2 positions, both ends of the cable
Supplied
Quantity 1 cable per unit

Fits / works with

Works with Notes
2.54 mm (0.1 in) pin headers Female ends push onto the header pins. Both connectors on this cable are 2-position, so the header needs two adjacent pins.
Solderless breadboards with 2.54 mm hole spacing, such as the 830 point breadboard Male ends push into the breadboard holes (Female to Male and Male to Male options).
Female sockets and header strips of 2.54 mm pitch Male ends push into the socket (Female to Male and Male to Male options).
Connectors with a pitch other than 2.54 mm Not compatible. Check the pitch printed in your module or board documentation first.

In the box

Included
  • 1 × 2-pin 30 cm AWG26 Dupont jumper wire, with the connector ends of the option you choose (Female to Female, Female to Male or Male to Male)

Options

Option What is different Choose it when
Female to Female Female socket housing on both ends You are joining two male header pins, for example from one board header to a module header.
Female to Male Female socket housing on one end, male pins on the other You are going from a male header to a breadboard hole or a female socket.
Male to Male Male pins on both ends You are going between two breadboard holes or two female sockets.

Applications

  • Wiring a two-pin module header (for example a switch, buzzer or fan header) to a board header
  • Extending a two-wire connection to 30 cm during prototyping
  • Testing a circuit on a breadboard
Good to know
  • The cable carries two wires, so it suits a two-wire connection such as power and ground, or a switch or buzzer on two adjacent header pins.
  • It is intended for low-voltage prototyping. Do not use it for mains (230 V AC) wiring.
  • Check the pitch and the number of positions on your module before ordering. This cable only fits 2.54 mm headers.

Resources

Which one should I choose?

Product Key difference Best for
This product (2-pin, 30 cm) 2 positions per connector, AWG26, 30 cm Two-wire connections on 2.54 mm headers
Dupont Cables Jumper Wires 30cm 3pin AWG26 3 positions per connector Three-wire connections on 2.54 mm headers
Dupont Jumper Wire 4Pin 30cm AWG26 4 positions per connector Four-wire connections on 2.54 mm headers

FAQ

▸ Which option do I need: Female to Female, Female to Male or Male to Male?

It depends on the two things you are joining. Use the end that matches the opposite of each connection point: a female end plugs onto a male header pin, and a male end plugs into a female socket or a breadboard hole. The Options table above lists a typical use for each.

▸ Do these fit a breadboard?

Yes, the male ends do, because they use 2.54 mm spacing. Choose Female to Male or Male to Male.

▸ How long is the cable?

The cable is 30 cm long.

▸ Can I use it for mains voltage?

No. It is intended for low-voltage prototyping only.

Technical question about this part? Email support@epartners.co.nz with your board and wiring, and we'll help you get it working.

Shipping: $5.99 urban, $9.99 rural. Free shipping on orders of $100 or more.

Order by 10:30am (NZT), Monday to Friday, and we dispatch the same day. Orders placed after 10:30am, on weekends or on public holidays are dispatched the next business day.

Delivery usually takes 1–2 business days after dispatch (2–3 for rural addresses). See our Shipping Policy for full details.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

Recently viewed