Package Included

- 1 x 3S 10A 12V Lithium Battery Charger Protection Board Module for 3pcs 18650 Li-ion Battery Cell Charging BMS 10.8V 11.1V 12.6V

Description:

- Size: approx.50x16x1mm
- Maximum discharge current: 10A
- Overcharge detection voltage: 4.25-4.35V±0.05V
- Over-discharge detection voltage: 2.3-3.0V±0.05V
- Maximum working current: 5A-8A
- Transient current: 9A-10A
- Operating temperature: -40~50℃
- Storage temperature: -40~80℃
- Quiescent current: ＜6uA
- Internal resistance: ＜60mΩ
- Service life: ＞30,000 hours

Short circuit protection.
- Overcharge protection.
- Overcurrent protection.
- Can be applied to various 3.7V lithium core.

Please be sure to read the following precautions

- https://bit.ly/Precausions-BMS

Attention:

Do not mix the good battery and poor battery to use.
Please, buyers, know the professional knowledge of this module before buying

10.8V (Rated voltage of polymer battery)
11.1V (18650 or 3.7V lithium battery rated voltage)
12.6V (Lithium battery full charge voltage)

Reference

- https://www.youtube.com/watch?v=kuEgZELszLk

Please Note:

When using it for the first time, you have to wake up the board through input for a few seconds.
Otherwise, no output voltage detected.