Package Included

- 1 x I2C interface SHT30 SHT30-D Digital Output Temperature Humidity Sensor

Description:

- Optimal working temperature and humidity range: 5 ° C ~ 60 ° C 20% RH ~ 80% RH
- Working voltage: 2.4 ~ 5.5V recommended 3.3V
- Humidity measurement range: 0 to 10% RH
- Humidity accuracy error: ±3% RH
- Resolution: 0.01% RH
- Repeatability: 0.10-0.25% RH
- Response time: 8s
- Long-term drift: <0.25% RH/year
- Temperature measurement range: -40 ° C ~ 125 ° C
- Temperature accuracy error: ±0.3 °C
- Resolution: 0.015 ° C
- Repeatability: 0.06-0.24 °C
- Response time: >2s

- ADR - This is the I2C address selection pin. This pin has a 10K pull-down resistor to make the default I2C address 0x44. You can tie this pin to Vin to make the address 0x45
- RST - Hardware reset pint. Has a 10K pullup on it to make the chip active by default. Connect to ground to do a hardware reset!
- ALR - Alert/Interrupt output. You can set up the sensor to alert you when an event has occurred. Check the datasheet for how you can set up the alerts

Reference

• https://www.circuitschools.com/interfacing-sht3x-temperature-and-humidity-sensor-with-arduino/#google_vignette
• https://electronicsinnovation.com/interfacing-sht3x-temperature-and-humidity-sensor-with-arduino/#google_vignette