Package Included :
- 1pcs x MOSFET Switch Driver Module

Description
- MOSFET: F5305S
- Input control voltage: 3.3V-12V
- Output charging voltage: 5-36V
- The board is optically isolated and completely separate from the 2-terminal voltage.
- The input is controlled by a 2-pin control and the ground control can be connected directly to the control switch.
- Control current 1-5MA control voltage is different, the current difference is mainly the loss on the LED.
- Charging large current: 22A, more than 5A need to add a heat sink.
- Host input and output screw terminal block
- The control terminal uses a 2.54MM pin for easy wiring.
- Control can be directly connected to the microcontroller IO. The MCU can control the motor speed with the PWM.
- Light brightness, etc. Please note that high currents require the addition of an additional heat sink

Reference
- https://www.youtube.com/watch?v=eAANkWDvusU&ab_channel=Robojax

#PB9004