Package Included

- 1 x BMP180 GY68 Digital Barometric Pressure Sensor Board Module

Description:

- As the device operates over I2C we've added optional I2C pull-ups that can be enabled using the PU (pull up) jumper on the board for your convenience and ease during breadboarding.
- Using I2C, the device provides pressure and temperature as 16bit values, which are used along with calibration data within the device are used to provide a temperature compensated altitude calculation.

- 1.8V to 3.6V Supply Voltage
- Low power consumption - 0.5uA at 1Hz
- I2C interface
- Max I2C Speed: 3.5Mhz
- Very low noise - up to 0.02hPa (17cm)
- Full calibrated
- Pressure Range: 300hPa to 1100hPa (+9000m to -500m)
- Weight: 1.18g
- Size: 21mm x 18mm

Reference

• https://www.circuitbasics.com/set-bmp180-barometric-pressure-sensor-arduino/#google_vignette

Video Reference