A Type-C boost charger board that charges 2S, 3S or 4S series lithium-ion packs from a 3–6 V supply, with CR and OK charge LEDs.
This 4A boost step-up charger board takes 5 V from a USB Type-C port (or 3–6 V DC on the VIN and GND pads) and raises it to the charging voltage of a 2S, 3S or 4S pack of 18650 cells. Choose the option that matches the number of cells in your pack.
Specifications
| Input | |
|---|---|
| Input voltage | DC 3–6 V (recommended 3.7 V or 5 V) |
| Input connector | USB Type-C, or VIN / GND solder pads |
| Input current rating | 4 A version |
| Charging | |
| Charging voltage | 8.4 V (2S), 12.6 V (3S) or 16.8 V (4S), depending on the option |
| Battery type | Series lithium-ion packs, 18650 cells shown in the product photos |
| Battery connection | BAT and GND solder pads |
| Protection | Battery overvoltage protection |
| Indicators | CR LED: charge status. OK LED: fully charged |
| Physical | |
| Dimensions | 39 × 18 × 6.3 mm |
| Weight | 5 g |
| Operating temperature | −40 °C to +85 °C |
Fits / works with
| Works with | Notes |
|---|---|
| Series Li-ion packs, 2S / 3S / 4S | Pick the option that matches your pack: 2S for 7.4 V, 3S for 11.1 V, 4S for 14.8 V (nominal). The 18650 cells in the product photos are wired in series. |
| USB Type-C power | 5 V supply. For the 4A version the product photos recommend a Type-C supply that can provide 4 A. |
| DC supply on VIN / GND pads | 3–6 V. The product photos say to use a supply rated above 2 A / 4 A for the 2A / 4A versions and to solder the wires well. |
| Series 18650 battery holder | Holds the cells in series; check that it holds the same number of cells as your option. |
In the box
- 1 × Type-C boost charger board (option as selected)
Options
| Option | What is different | Choose it when |
|---|---|---|
| 2S | Charges to 8.4 V | Your pack is 2 cells in series (7.4 V nominal). |
| 3S | Charges to 12.6 V | Your pack is 3 cells in series (11.1 V nominal). |
| 4S | Charges to 16.8 V | Your pack is 4 cells in series (14.8 V nominal). |
Applications
- Charging a 2S–4S series 18650 pack from a 5 V USB Type-C supply
- Charging a series pack from a 3–6 V DC source or a single lithium cell on the VIN and GND pads
- Check the polarity before connecting the battery: BAT is positive and GND is negative. Do not short the battery pads.
- Use the option that matches your pack. A 2S board is not for a 3S or 4S pack.
- This page lists battery overvoltage protection only. Cell balancing is not specified, so use cells of the same type and charge level, and a pack with its own protection board.
- Charge lithium cells where you can watch them, on a non-flammable surface.
Video guide
FAQ
▸ Which option do I need for my battery pack?
Match the option to the number of cells in series: 2S for two cells (charges to 8.4 V), 3S for three (12.6 V) and 4S for four (16.8 V).
▸ Can I charge it from a USB Type-C port?
Yes. The board has a USB Type-C input that takes 5 V. For the 4A version the product photos recommend a supply that can provide 4 A.
▸ Can I power it from something other than USB?
Yes. Solder a 3–6 V DC supply to the VIN and GND pads. The recommended input is 3.7 V or 5 V.
▸ What do the CR and OK LEDs mean?
The CR LED shows charge status, and the OK LED lights when the battery is fully charged.
Technical question about this part? Email support@epartners.co.nz with your battery pack and wiring, and we'll help you get it working.
Shipping: $5.99 urban, $9.99 rural. Free shipping on orders of $100 or more.
Order by 10:30am (NZT), Monday to Friday, and we dispatch the same day. Orders placed after 10:30am, on weekends or on public holidays are dispatched the next business day.
Delivery usually takes 1–2 business days after dispatch (2–3 for rural addresses). See our Shipping Policy for full details.