{"product_id":"arduino-pro-micro-compatible-genuine-atmega32u4-microcontoller-type-c-usb","title":"Arduino Pro Micro Compatible - Genuine ATmega32U4 Microcontoller Type C USB","description":"\u003ch2\u003ePackage Included \u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003e- 1 x Type C USB Socket, ATmega32U4 Pro Micro 5V 16MHz Board Module For Leonardo ATMega 32U4 Controller with Micro USB interface\u003c\/p\u003e\n\u003ch2\u003eDescription\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMicrocontroller: Genuine ATmega32U4***\u003cbr\u003e   • USB Interface: Type C USB Socket\u003cbr\u003e   • Work product catalog : 16 MHz\u003cbr\u003e   • Operating voltage : 5V\u003cbr\u003e   • Input Voltage ( recommended ) :7-12V\u003cbr\u003e   • Total IO Pins: 18\u003cbr\u003e   • Digital IO Pins: 14 (of which 5 provide PWM output)\u003cbr\u003e   • Analog Input Pins: 4 (shared with digital IO pins)\u003cbr\u003e   • UART: 1 (Serial communication)\u003cbr\u003e   • SPI: 1\u003cbr\u003e   • I2C: 1\u003cbr\u003e   • PWM Output: Available on 5 pins\u003cbr\u003e   • External Interrupts: Available on all digital pins\u003cbr\u003e   • 5V digital \/ analog port maximum allowable current : 40 mA\u003cbr\u003e   • 3.3V digital \/ analog port maximum allowable current : 50 mA\u003cbr\u003e   • Flash Memory: 32 KB (ATmega32u4) of which 4 KB used by bootloader\u003cbr\u003e   • SRAM: 2.5 KB (ATmega32u4)\u003cbr\u003e   • EEPROM: 1 KB (ATmega32u4)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNOTICE:\u003cbr\u003eThis board is designed for 5V operation, so please make sure that 5V, 16MHz is selected when setting up the board.\u003cbr\u003eIf you upload the program with the setting configured for 3.3V, the board may no longer be recognized after the serial upload process.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eNote: These modules are tested and confirmed they are 100% working.\u003cbr\u003eIf you use a cable that does not comply with the Type C standard, it will not work, so you must use a cable that meets the standard.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eTest Code for Blink\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cspan\u003eint\u003c\/span\u003e\u003cspan\u003e RXLED = \u003c\/span\u003e\u003cspan\u003e17\u003c\/span\u003e\u003cspan\u003e;\u003c\/span\u003e\u003cspan\u003e \/\/ The RX LED has a defined Arduino pin\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eint\u003c\/span\u003e\u003cspan\u003e TXLED = \u003c\/span\u003e\u003cspan\u003e30\u003c\/span\u003e\u003cspan\u003e;\u003c\/span\u003e\u003cspan\u003e \/\/ The TX LED has a defined Arduino pin\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\u003cdiv\u003e\u003cspan\u003e\/\/ the setup function runs once when you press reset or power the board\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003evoid\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003esetup\u003c\/span\u003e\u003cspan\u003e() {\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003epinMode\u003c\/span\u003e\u003cspan\u003e(RXLED, OUTPUT);\u003c\/span\u003e\u003cspan\u003e \/\/ Set RX LED as an output\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003epinMode\u003c\/span\u003e\u003cspan\u003e(TXLED, OUTPUT);\u003c\/span\u003e\u003cspan\u003e \/\/ Set TX LED as an output\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e}\u003c\/span\u003e\u003c\/div\u003e\n\u003cbr\u003e\n\u003cdiv\u003e\u003cspan\u003e\/\/ the loop function runs over and over again forever\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003evoid\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eloop\u003c\/span\u003e\u003cspan\u003e() {\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003edigitalWrite\u003c\/span\u003e\u003cspan\u003e(RXLED, HIGH);\u003c\/span\u003e\u003cspan\u003e \/\/ set the LED off\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003edigitalWrite\u003c\/span\u003e\u003cspan\u003e(TXLED, LOW);\u003c\/span\u003e\u003cspan\u003e \/\/ set the LED off\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003edelay\u003c\/span\u003e\u003cspan\u003e(\u003c\/span\u003e\u003cspan\u003e300\u003c\/span\u003e\u003cspan\u003e);\u003c\/span\u003e\u003cspan\u003e \/\/ wait for a second\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003edigitalWrite\u003c\/span\u003e\u003cspan\u003e(RXLED, LOW);\u003c\/span\u003e\u003cspan\u003e \/\/ set the LED on\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003edigitalWrite\u003c\/span\u003e\u003cspan\u003e(TXLED, HIGH);\u003c\/span\u003e\u003cspan\u003e \/\/ set the LED on\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003edelay\u003c\/span\u003e\u003cspan\u003e(\u003c\/span\u003e\u003cspan\u003e300\u003c\/span\u003e\u003cspan\u003e);\u003c\/span\u003e\u003cspan\u003e \/\/ wait for a second\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2\u003eReference\u003c\/h2\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/mvv1BRjswew?si=Dscy30BL_3gabEck\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"ePartners NZ","offers":[{"title":"Default","offer_id":43564859621626,"sku":"ST6003","price":17.99,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0638\/6771\/5834\/files\/arduino-pro-micro-compatible-genuine-atmega32u4-microcontoller-type-c-usb-486172.jpg?v=1726481313","url":"https:\/\/epartners.co.nz\/products\/arduino-pro-micro-compatible-genuine-atmega32u4-microcontoller-type-c-usb","provider":"ePartners","version":"1.0","type":"link"}